New Parts Topic

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
21 Nov 2019 20:25 - 20 Dec 2019 16:43 #15649 by Geno
Replied by Geno on topic New Parts Topic
I found something else today I had that I left out of the old store. It's the Wheel Horse #112185 connector housing. Toro no longer has the 105312 connector terminals for it but we do. This is the female connector housing that fits the connection to the Magnum engines on the harness side, the engine side of the connector is the same parts that are used in our Indak switch pigtail. :thumb1

I'm not gonna put it in the old store but it is in the new one.

It is here - 112185 Female Indak Housing

Welcome to the Stables!
Attachments:
Last edit: 20 Dec 2019 16:43 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
26 Nov 2019 14:06 - 26 Nov 2019 16:25 #15653 by Geno
Replied by Geno on topic New Parts Topic
Just added 3 more new pieces to the new store. We've been making them for many years but up until now were just available to walk in customers. They will be available as soon as the new store is done. :thumb1

Welcome to the Stables!
Attachments:
Last edit: 26 Nov 2019 16:25 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
11 Dec 2019 12:50 #15668 by Geno
Replied by Geno on topic New Parts Topic
Made a few new things yesterday.

#1 - the smaller battery clamp for the round hoods and short frame tractors #4958.
#2 - the rear slot hitch stay.

The stay took a little while but I had to make a jig to bend them and they need a lot of clean up after they are done. :thumb

Of course there is a tractor here that needs them along with the last Kohler plug wire I haven't done yet, that's why things get done sometimes lol... :rolling

Welcome to the Stables!

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
12 Dec 2019 09:21 - 20 Dec 2019 16:36 #15669 by Geno
Replied by Geno on topic New Parts Topic
The longer Onan 0167-1615-04 front plug wire is in the old store. Had some calls for them and found out that the Onan plug wires for the P216, 218 and 220 are unavailable nationwide with no ETA on when they will be available. This one is made just like the smaller one (0167-1615-01) that we make only longer.

They are here at the Stables though. :thumb1

Edit: They are in both stores now.

All the plug wires made so far are here - Plug Wires

Welcome to the Stables!
Last edit: 20 Dec 2019 16:36 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
12 Dec 2019 09:46 #15670 by Geno
Replied by Geno on topic New Parts Topic
The Kohler plug wires for the front lower coil mount like the 753, 854, etc are done too. Just need to get them in the store today. :smile2

Welcome to the Stables!
Attachments:

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
16 Dec 2019 12:13 - 20 Dec 2019 16:34 #15679 by Geno
Replied by Geno on topic New Parts Topic
I didn't get more plug wires for the Kohler above made but I did get the shorter (short frame) 4958 battery clamp in the new store this morning. Not a lot of difference but enough to warrant another part. :thumb1

They are here - 4958 Battery Clamp

Welcome to the Stables!
Attachments:
Last edit: 20 Dec 2019 16:34 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
16 Dec 2019 12:56 - 16 Dec 2019 12:57 #15681 by Geno
Replied by Geno on topic New Parts Topic
I thought I put this one in here but missed it. The rear long hitch holder pin is in the store now too. It comes with spacers and clips as well. :thumb1

Too many things going on at once. :laughing

It is here - Rear Hitch Mounting Pin Assy

Welcome to the Stables!
Attachments:
Last edit: 16 Dec 2019 12:57 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
20 Dec 2019 15:13 - 20 Dec 2019 16:32 #15690 by Geno
Replied by Geno on topic New Parts Topic
The plug wires for the lower front mounted coils are made up and in the store. :woo Didn't make a lot of them because it wasn't used on too many years.

They are here - 238057-12 Plug Wire

I guess the only Kohler wire left to make is take a 4HP apart and make something for it. :yes

Welcome to the Stables!
Attachments:
Last edit: 20 Dec 2019 16:32 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
20 Dec 2019 16:30 #15691 by Geno
Replied by Geno on topic New Parts Topic
The slot hitch stays are now in the store. :thumb

They are here - Slot Hitch Stay

Welcome to the Stables!
Attachments:

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
20 Dec 2019 16:38 #15692 by Geno
Replied by Geno on topic New Parts Topic
I've been forgetting to add links to the store for all of the new stuff here lately. I just edited a lot of posts above and added links. I got too excited and need to slow down I guess. :rolling3

Welcome to the Stables!

Please Log in to join the conversation.

Time to create page: 0.629 seconds