How to get hydralics from trany

More
24 May 2020 18:40 #16013 by Guy
bought it in 1973 just repainting but now I am getting old and need hydraulics for the blade.Its a 12 automatic
the transmission shiftier is between your nees and has a bypass vale at the left heel of the operator turned by a screw driver
the numbers on it are hard to read looks like 2-25 and 7090124. It would be nice to know the manufacture and where to tap into it.
Thanks for any help.

Please Log in to join the conversation.

  • Geno
  • Online
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
25 May 2020 08:21 #16014 by Geno
Here is a manual on the hydro package and how to install it, this applies to your 73 . If you look at the parts breakdown there are a lot of parts involved.

Welcome to the Stables!
Attachments:

Please Log in to join the conversation.

More
26 May 2020 19:48 #16029 by Guy
Replied by Guy on topic How to get hydralics from trany
Thanks Gino for the quick reply.My Horse only has Automatic on it not Charger The picture looks different on the left end of the casting it looks like the relief valve for pushing is on the top where mine is on the same side but at the bottom front and is turned with a screw driver
My horse cerial # is937385
model10465 8
Also I fond a tag on the trany
model 90-1136
serial # 03- AA 128242
Wonder if anyone could give me a measurement on the cylinder length.
Thanks for the help much appreciated

Please Log in to join the conversation.

More
26 May 2020 19:49 #16030 by Guy
Replied by Guy on topic How to get hydralics from trany
its a sunstrand trany

Please Log in to join the conversation.

  • Geno
  • Online
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
26 May 2020 20:13 #16031 by Geno
That manual is supposed to cover the 68-73 models, the tractor pic is just one they picked when they made the manual. There is only 1 other hydro lift setup minus the older and much newer stuff.

Welcome to the Stables!
Attachments:

Please Log in to join the conversation.

Time to create page: 0.633 seconds