Carb cleaning

More
13 Apr 2015 23:04 #3204 by Bobster
Carb cleaning was created by Bobster
Hey gang, my k181 idles pretty good but faulters when you try to open it up. Feather it a little and it idles up pretty nice. Is there a procedure that would allow me to clean up the carb without taking it off the engine. It has sit for awhile. What would you do short of a complete overhaul. Thanks

Please Log in to join the conversation.

More
14 Apr 2015 07:06 #3223 by GT 14
Replied by GT 14 on topic Carb cleaning
Any thing you can remove (idle, mid, main) take them out and spray carb. cleaner in. If you can get the main jet out spray all the orifices.

1969 GT-18
1978 C-101
1983 C-225

Please Log in to join the conversation.

  • Geno
  • Online
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
14 Apr 2015 07:58 #3229 by Geno
Replied by Geno on topic Carb cleaning
You can probably also remove the bowl and clean it too. There may be lots of gunk in there. :)

Welcome to the Stables!

Please Log in to join the conversation.

More
14 Apr 2015 16:53 #3268 by AJ WH Ranger
Replied by AJ WH Ranger on topic Carb cleaning
:agree :goodpost

AJ
Bassin' and Horsin' around!

66 Lawn Ranger
68 Lawn Ranger
72 Charger 10 auto
74 C-100 8-Speed
81 C-101 Blackhood

Please Log in to join the conversation.

More
21 Apr 2015 20:55 #3615 by JustinW.73
Replied by JustinW.73 on topic Carb cleaning
I'd take it off. Its easy to take it off and might as well do it once. Take the float off, needle valve, high/low speed needle. Make sure the bowl nut holes are clear. (this is most likely the problem, if the hsn is on the bowl)

1973 No Name 16
1966 856
1964 854
198? 520H
Way too many decks
1966 f100

Please Log in to join the conversation.

More
30 Jun 2015 12:32 #6375 by Bobster
Replied by Bobster on topic Carb cleaning
Well I took the carb off and soaked it in carb cleaner a couple days. Installed the new kit. Put it back on the engine and cranked it up. It was my first time to rebuild a carb and man you could tell it. I could never get it to run right. Seemed erratic. Choke it hard and it would start. Run for a while and it would quit. Played with it a couple days with no real luck.

Yesterday I took the carb off again and opened it up.......

Ugly

Could that much junk come out of the tank.
Removed tank today.
Soaking the old petcock so I can replace it.
Gonna replace fuel line

Carb is soaking in cleaner again.

How should I flush out the fuel pump? Don't want to take it apart if I don't have too.

What a mess....

Thanks for looking
Attachments:

Please Log in to join the conversation.

More
30 Jun 2015 12:47 - 30 Jun 2015 12:53 #6376 by JustinW.73
Replied by JustinW.73 on topic Carb cleaning
That looks pretty bad. If I were you I'd just get another carb. Fuel pumps just take it off, and hold it a little higher than the tank. Keep pushing the lever and if has comes out good then its fine.

1973 No Name 16
1966 856
1964 854
198? 520H
Way too many decks
1966 f100
Last edit: 30 Jun 2015 12:53 by JustinW.73.

Please Log in to join the conversation.

More
30 Jun 2015 12:55 #6377 by JustinW.73
Replied by JustinW.73 on topic Carb cleaning
And that stuff is varnisized gas. Looks like water was in there too.

1973 No Name 16
1966 856
1964 854
198? 520H
Way too many decks
1966 f100

Please Log in to join the conversation.

  • Geno
  • Online
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
30 Jun 2015 14:40 #6378 by Geno
Replied by Geno on topic Carb cleaning
Well, now you know what's wrong with it. :) I would try to clean it out and save it, but I'm really tight. :rolling

Welcome to the Stables!

Please Log in to join the conversation.

More
30 Jun 2015 16:31 #6379 by nappypappy
Replied by nappypappy on topic Carb cleaning
Don't know if you could ever clean that enough.... might be better to get a new one....unless you are as tight as Geno......:rolling2 :smile2

1985 416-8
520-H
You can lead a horse to water but you can't make him drink.
I can't see the forest for the trees.

Please Log in to join the conversation.

Time to create page: 0.345 seconds